 |
|||
|
|||
|
Front Page Phone |
Save Diesel Fuel Australia - Save Fuel Tips - Save Fuel Save Money - Save Petrol Australia
BITRON P900 PETROL POWER TREATMENT
Bitron P900 Petrol Power Treatment is a complex blend of petro-chemicals designed to oxygenate and improve the burn characteristics of the fuel (leaded and unleaded) regardless of octane rating.
It is formulated with use in any petrol or alcohol powered engines (even propane and natural gas). The Bitron P900 Petrol Power Treatment improves the fuel’s lubricity, coating all metal surfaces throughout the fuel system and upper engine with a protective layer, reducing friction and wear. Bitron P900 will coat the entire top-end (injectors, carburettors, spark plugs and valves) & fuel pumps with molecules, preventing the build-up of hydrocarbons and increasing engine life. It will even break down gums and varnishes, reducing existing carbon build-up and minimising pre-ignition and dieseling. In the fuel tank it will slow down degradation of fuels due to moisture build-up and fungal growth, and will in fact absorb moisture and prevent freeze-up. Bitron P900 Petrol Power Treatment improves the structure of the combustion, increasing the temperature of combustion and the amount of available oxygen in the fuel itself. This means that when the fuel burns, oxygen has already been introduced into the chemical makeup of the fuel and becomes a key component. The net result is that the fuel ignites and burns faster, hotter and more completely, so that more of the energy is released from the fuel. In terms of emissions this means that the carbon monoxide (CO) and hydrocarbon (HC) levels will most likely be dramatically reduced. Points to note:
1. The process of cleaning the fuel tank and lines can result in clogging of fuel filters. It is advisable to change the fuel filters after the first two tanks of Bitron P900. 2. Using less than recommended amounts will reduce effectiveness. 3. Most modern cars today can, with the use of Bitron P900 Petrol Power Treatment, run perfectly well on regular unleaded fuel. 4. Bitron P900 Petrol Power Treatment is non-corrosive and contains no solids, PTFE resins, molybdenum, lead or any other metals. Directions for use:
Initial Treatment:
Add Bitron P900 Petrol Power Treatment at 4L per 1000L of petrol (4ml/Litre) for the first two tanks of fuel. Ongoing treatment: Add Bitron P900 Petrol Power Treatment at 1-2ml/Litre with every tank of fuel. To maximise octane boost add Bitron P900 at a rate of 3-4ml/Litre. |
||